Low PPM Nutes...(Beta Tester Thread)

A question and I apologize if it's already been asked, when using these ferts in coco how did you charge it and at what EC?
Anyone have a nutrient profile for these ferts?

:peace:
DD
 
FOE20 said:
did I mention somethin bout PM?....all Ive said is the plants look great...looks fine to me man...keep rollin
FOE20
Click to expand...

no you didn't my friend but you are so observant that two photos ago
there was a touch on the top of a couple leaves.
oxidate and more air movement has helped that.
thank you for looking in homie

Dangdonkey:
A question and I apologize if it's already been asked, when using these ferts in coco how did you charge it and at what EC?
Anyone have a nutrient profile for these ferts?

>i have always charged with full strength ferts
but now i charge with full strength 225 ppm and cal mag at 200 ppm
sorry no ec meter
 
Last edited:
"c'mon man!"
this girl deserves a nice, big centerfold. she's a beaut

another nice finish and want to say thanks again for sharing the knowledge and the 'proof' that this is solid science


attachment.php
 
Like FOE20 said there sure is a ton of leaves on that gal.

I hope that you also have a ton of bud there too. Hard to tell. Let us know what you end up with.
 
=FOE20;803574]a touch of PM?.....even with my glasses on I still didnt see any bro...heh..

>good to hear..

but your so on top of your work its just great watchin it happen...
but agree with GoneJah...those ladies look fantastic...only concern is the amount of leaf but thought that may be more connected to the genetics and not the nutes?...


would like to hear your thoughts on that tho

>connected to genetics

the chemd1 in the other room hardly have a leaf ..just glistening

i just like the fat indica...the buds on her are so dense this time..

but yeppers.. leaf central..i am not into maxing my crops i just like

variety

Melon...
FOE20[
 
the other room is down
the chemd's yielded very good
never had more dense
the unflushed taste is better than flushed ever was before..
there is zero chem after taste..know the organics may not believe it
and of course ordanic is fine with me..

next round try to do some topping on the chemd's and anything else i can find
to make em yield even better
again will be a mixed bag next round.
cal/mag and fulvic and air stones @225ppm's in 4 gal buckets instead of the 10"net pots
which also worked good

altransplants were grown un der leds to 18"+
 
Can't be any better than this - great report and results :salut:

Recap:
Does low PPM/EC effect yield?
"the chemd's yielded very good / never had more dense" - i'll take that as a no

Does low PPM/EC effect taste?
the unflushed taste is better than flushed ever was before..
there is zero chem after taste..know the organics may not believe it
 
No I would say it doesnt affect yield . Cause when the plant has everything it needs it just goes like mad and low PPM is useally more then enough to
build generous size nugz.
Here is a couple of shots of my low PPM nutes test harved nugz.The flush was easy and super clean .
attachment.php


attachment.php


attachment.php


attachment.php

attachment.php
 
Last edited:
this is the LAST installment of my contribution

the harvest will happen soon all plants were healthy

i am enclosing shots of the totally all LED veg for the next round

24 transplants for next run...plus 8 or so extras so over 32 plants@18"-24"

done on two 4x 4 rooms each with three blackstar 240's which each has 100w of leds

so 300w leds and 3 fans per. this was my concurrent led panel test

they smoke like dream come true..the low ppm's

produce a product that leaves the fertilizer behind

even unflushed
 
"This is the LAST installment of my contribution"
thank you kind sir for your contributions. i can say personally, you and d helped changed my garden forever


thought someone said 'it's hard to see the buds...still?
not sure how you keep the mold/pm at bay with such dense, tight girls, but hats off to ya ma!

attachment.php

​
 
Thanks Gonejah,

Never had any pm for the last 8 yrs..then only had it one cycle..

rh was around 55% it was air movement and not a large dif between day and night temps

had zero mould this run.....they got so dense that nothing can get inside?

the taste dif for me is chemgak tastes like chem gak
organic tastes like what it was grown with ie. not benign

but this low ppm's have no taste/aftertaste footprint

you only taste the terpenes

hahaha
 
Pa>>> Lookin amazing Brotha, glad the nutes worked so well for you! :egypt:

Melon>>> What can I say that I haven't already my old friend ? :adore:

You've rocked these low ppm nutes since the get-go! :22_yikes:
IMHO, during the process, you have diligently proven beyond a shadow of a doubt...that less can definitely lead to more. Thank-you for your contributions! :ty:
 
Dman said:
Pa>>> Lookin amazing Brotha, glad the nutes worked so well for you! :egypt:
Click to expand...

Thanks It's my best work to date ,but I have moved from soil so the full test will now begin . So far it looking Great double the speed of last grow ,pics to be had in the very near future .
 
H.O.G 16 days

I have converted to perlite but useing ONLY DaNuteZ at low PPM's
of 225-250+80 for nothing over 320 .
16 days in Im impressed with perlite so far.
 
Low ppm nutes have been documented and used by all folks in the know for many many yrs.....

Heath talked me into less than 1.6 EC a long time ago and shit worked well till shutdown....

Peace...DHF....
 
I have been using "Da Nutes", for a week and a half to two weeks now and everything is looking great.

My water out of the tap is 80 ppm (.5 conv), .2 ec, which I mix to a total of 250 ppm/.5 ec with nutes.

The only stuff I add is enzymes and Roots Excelurator , which bumps the total mix up to 265 ppm.

Dman, would you rather that I leave the Roots Excel out of the mix?

I'm leaving for a trip tomorrow, I'll get some side by side pics up next week when I get back.

PS, I've only been testing on veg plants, I thought of testing on flowers but want to give them a complete run, instead of splitting up nutes.
 
Heya Harpo :wave:

If you want a true test, I would use no additives whatsoever. :exactly:
Harpocrates said:
I have been using "Da Nutes", for a week and a half to two weeks now and everything is looking great.

My water out of the tap is 80 ppm (.5 conv), .2 ec, which I mix to a total of 250 ppm/.5 ec with nutes.

The only stuff I add is enzymes and Roots Excelurator , which bumps the total mix up to 265 ppm.

Dman, would you rather that I leave the Roots Excel out of the mix?

I'm leaving for a trip tomorrow, I'll get some side by side pics up next week when I get back.

PS, I've only been testing on veg plants, I thought of testing on flowers but want to give them a complete run, instead of splitting up nutes.
Click to expand...
 
You must log in or register to reply here.
Back
Top