Back with a vengeance

Cabby

Cabby

New member
OK I had to rebuild everything from the chopped up system that I had perfected in my greenhouse and pole barn..

Most certainly smaller and very crowded now compared to the warehouse feel I had before.

But in a much safer environment.

I have stuffed six Botanicare 4x4 tables in this lil room down from two rows of 4 with eight before.

Same principle applied, I will construct my rings for proper and even flow tomorrow.

Just trying to hustle things along and get these clones going for my patients

Things are a bit grubby but I'll be scrubbing with a brush and bleach as I progress...not to worry the internals are all scrubbed and sterilized.


Gonna order some 1 1/2" Uniseals tomorrow for the tray to drain pipe seal as the current configuration has a leak in tray 1 .

I love Uniseals,,,,,,


She runs 24/7 with a 3 speed grundfos circulating pump
 
plumbing is schedule 40 pvc
3/4 supply
1 1/2" drain (return)
1/2 " air
 

Attachments

  • 1-20150111_212208.jpg
    1-20150111_212208.jpg
    93.2 KB · Views: 45
Stock tank is 100 gal
Grundfos pump draws from it
a jet of water is directed towards the inlet riser
air is oxygenated here and with an 8" airstone
in the center of each table which is submerged.
 
I can't upload anything without a failure error...

Not sure what is going on but this sucks....
 
as always you gonna get er done................

I could see you in there with a lab coat like Simon Barsinister (Underdog cartoon) takin' care of business........

look forward to more.........all the best in a safe grow amigo................
 
a nice clean looking set up Cabby. My tray system was a proto type from years ago, but that metal support system looks almost the same as mine, so do the trays.
Grow on Cabby.
 
:popcorn:

What strains? I enjoyed your BBNL for a long time Cabby, one of the few herbs that enhanced my dart playing. It made a great hybrid with SSH, albeit a little foxtaily, BBNL added a great depth of flavor.
 
Thanks a bundle guys..
Actually she's a mess right now but I'm working to get her cleaned up
Work keeps me so busy I barely have time..

I'm actually keepin it very small scale with regards to numbers
6 trays with 4 gals per ....24 total..

But I'm gonna let em get knarly and trellis the whole damn thing into
two hedge rows...

My patients are very sick so I'm really under pressure, 1 with terminal cancer
has been worsening...I'm sick thinking about it .

Had to go acquire CBD capsules last week to keep the cells from replicating.

I'm convinced that the combination of THC and CBD is the proper symbiotic
pairing for proper healing ..

Rick Simpson never used much more than old indicas and had super results.


It's a work in progress

I'll keep it coming


My pic sizes were too large ,,dohh! yes I'm that busy I missed it..
 

Attachments

  • 1-1-20150111_212223.JPG
    1-1-20150111_212223.JPG
    242.6 KB · Views: 21
  • 1-1-20150111_212259.jpg
    1-1-20150111_212259.jpg
    179.1 KB · Views: 11
  • 1-1-20150111_212324.jpg
    1-1-20150111_212324.jpg
    115.1 KB · Views: 21
  • 1-1-20150111_212405.jpg
    1-1-20150111_212405.jpg
    87.5 KB · Views: 17
I'll make some rings this week..
The strain is an F1 I made from some majorly dank Fire OG phenos
I found in the beans BF sent WIFI .

I hit two gals with a few males that were really nice Mosca's Old Time Moonshine x Indiana B Gum cut...

The nug is from a pheno from that batch..

I have a 1 k over each table , not yet vented , prolly won't until spring
I'll take all the heat I can get , hell I'm paying for it !

These hoods are really tall....
 

Attachments

  • 1-20150111_212840.jpg
    1-20150111_212840.jpg
    72.5 KB · Views: 18
  • 1-20150111_212136.jpg
    1-20150111_212136.jpg
    130.2 KB · Views: 9
  • 1-20150111_212344-001.jpg
    1-20150111_212344-001.jpg
    119.9 KB · Views: 3
What are you guys using now that hydroton is gone ?
I never thought I'd miss that stuff...
Yano how painful it is to step on one of them lil balls
in barefeet ?

This is hydrocorn...some substitute,,mostly broken up shit
 
StoneyPufnstuff said:
:popcorn:

What strains? I enjoyed your BBNL for a long time Cabby, one of the few herbs that enhanced my dart playing. It made a great hybrid with SSH, albeit a little foxtaily, BBNL added a great depth of flavor.
Click to expand...

Funny you say that as I have plans for Ol Sog's SSH cut to be hit be this
OTM X Indiana Bgum male that i Have ...

They do make great breeders..

If I recall that supposed story of Bubba Kush is IBgum X an OG kush ...
I never really believed it until I played with some Katsu Bubba S1's I made
and I'll be damned if I didn't have a few rare OG Kush phenos show..

It was a long time ago and I had never ran an OG Kush at the time and I was amazed at the lil massively chunky golf balls with huge calyxes phenos ..


I was thinking "good god what the hell is this freak "

Now they are the norm....
 
OK I gotta get back to work
be back tonite...


Ohhh if you havn't watched "Unbroken"

PLease do yourself a favor.....

watch it !!


A stellar life... what a movie and a book...

Angelina Jolie may as well quit acting because that movie was directed by her
it was that good ....


You can stream it and watch it from putlocker...

just be patient and keep closing all the pop ups that initiate as you start it ..

then hit the full screen option and enjoy....
 
Trying to get a lil time to fix a flaw in the system...


Uniseals arrived today ..

1 1/2" returns are gonna get repaired properly.
I hate leaks...

Old SOG's SSH cut for those asking...

This is what she looks like...
 

Attachments

  • 1-20150114_015222.jpg
    1-20150114_015222.jpg
    78.5 KB · Views: 1
  • 1-20150114_015149.jpg
    1-20150114_015149.jpg
    96.6 KB · Views: 1
  • 1-20150114_015037.jpg
    1-20150114_015037.jpg
    80.4 KB · Views: 4
  • 1-20150114_015020.jpg
    1-20150114_015020.jpg
    68.6 KB · Views: 4
  • 1-20150114_014956.jpg
    1-20150114_014956.jpg
    97.8 KB · Views: 10
  • 1-20150114_014320-001.jpg
    1-20150114_014320-001.jpg
    159 KB · Views: 11
Amen....

Here's to no more leaks....

I always drill a 1/4" hole low on the coupling to allow the tray to fully drain to the waste
when I open the main dump .

This allows me to do complete reservoir exchanges or cleaning at the end of a flower cycle.
 

Attachments

  • 1-20150114_030740.jpg
    1-20150114_030740.jpg
    48.8 KB · Views: 3
  • 1-20150114_030659.jpg
    1-20150114_030659.jpg
    72.2 KB · Views: 4
  • 1-20150114_030346.jpg
    1-20150114_030346.jpg
    36.1 KB · Views: 2
  • 1-20150114_025835.jpg
    1-20150114_025835.jpg
    86.2 KB · Views: 6
  • 1-20150114_025831.jpg
    1-20150114_025831.jpg
    69 KB · Views: 3
  • 1-20150114_024728.jpg
    1-20150114_024728.jpg
    58.4 KB · Views: 2
  • 1-20150114_024700.jpg
    1-20150114_024700.jpg
    48.4 KB · Views: 3
  • 1-20150114_024649.jpg
    1-20150114_024649.jpg
    70.4 KB · Views: 2
Last edited:
ain't nobody got time for that ....



http://youtu.be/zGxwbhkDjZM



Uniseals kick total ass and are the end all be all when it comes to proper
builds with hydroponic systems.

Just always be sure to do three things...

cut a reverse chamfer on the sharp 90 degree edge of the pipe you cut and intend to push through
the uniseal opening. (make it a taper)

Always spray the inner uniseal and the pipe with a soapy solution before assembly.

Always set you pvc cleaner and cement far away from you as you will always manage to knock
them over and spill that shit everywhere ....
 

Attachments

  • 1-20150114_031014.jpg
    1-20150114_031014.jpg
    80 KB · Views: 4
Last edited:
You must log in or register to reply here.
Back
Top